Publicité
Les langues disponibles
Les langues disponibles
Choose one of the three methods for connecting to a TV.
SPEAKERS OUT
FRONT
CENTER
FRONT
VIDEO OUT
SURROUND
SUBWOOFER
SURROUND
COMPONENT
AUX IN
SPEAKER IMPEDANCE : 3
OUT
METHOD 1 : Component (Progressive Scan) Video
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied)
from the COMPONENT OUT (P
jacks on your TV.
METHOD 2 : Scart (Europe only)
If your television is equipped with a SCART input, connect the supplied video cable from the VIDEO OUT jack
on the back of the product to the VIDEO jack on the Scart adapter (Europe only), then connect the SCART
adapter's jack to the SCART IN jack on your television.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack
on your TV.
✎
NOTE
`
When the Progressive scan mode is selected, the VIDEO output does not feed any signals.
`
This product operates in Interlace scan mode 480i(576i) for component/composite output.
`
After making the video connection, set the Video input source on your TV to match the corresponding Video
output mode on your product.
Turn this product on first before you set the video input source on your TV. See your TV owner's manual for
more information on how to select the TV's Video Input source.
!
CAUTION
`
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
All manuals and user guides at all-guides.com
Connecting the Video Out to your TV
Green
Blue
Red
FM ANT
, P
and Y) jacks on the back of the product to the Component Video Input
R
B
METHOD 1
METHOD 3
(supplied)
METHOD 2
(Europe only)
SCART IN
15
English
Publicité
