NUGENI STEAMPAC+ SMP110 Mode D'emploi page 8

Handheld Operation
Fill Water Tank
Always unplug power cord before filling water.
!
WA R N I N G
Never refill water while steamer is in use.
1. Open water tank cap by pulling up firmly on tab.
2. Use filling pitcher to add water. Do not overfill.
3. Close water tank cap securely, ensuring seal
fully "snaps" closed.
Attach Accessories
Note: Unit will not emit steam without high pressure steam
nozzle, steam cylinder, or extension hose properly installed.
Directly to Handheld Unit
1. Install high pressure steam nozzle: align nozzle base with
steam port and push firmly to "click" secure.
2. Install accessory attachments as needed: align accessory
base with nozzle tip and push firmly to "snap" secure.
To Remove Steam Nozzle:
3. Press and hold accessory release button.
4. Pull high pressure steam nozzle firmly to
remove from steam unit.
!
WA R N I N G
Turn steamer off
and allow to cool
before installing
or changing any
accessories.
For Added Reach And Cleaning Mobility:
Steamer Extension Hose
1. Install steamer extension hose: align input end
of hose with handheld unit steam port and push
firmly to "click" secure.
2. Install high pressure steam nozzle onto extension
hose: align nozzle base with hose handle steam
port and push firmly to "click" secure.
Install and remove accessories using
same steps described above.
8
All manuals and user guides at all-guides.com
2
3
2
1
3
+
4
1
mynugeni.com
2