JANE NOON Mode D'emploi Et Instructions D'installation page 10

All manuals and user guides at all-guides.com
Next, fit the crosspieces by simultaneously inserting the 2 side connectors upwards into the guides until they are
slotted in fully.
Insert them from the bottom to the top until they have both clicked into place.
Repeat the same process with the second crosspiece.
OK
"CLICK" "CLICK"
OK
OK
OK
Turn the cot over and put the mattress and the pillow back in it.
Fasten the 4 Velcro flaps around the crosspieces, making sure that they are fully fastened.
To dismantle the cot, follow the same process in reverse.
CHANGING THE HEIGHT OF THE RAIL TO THE LOWER POSITION
To lower the height of the safety rail: fully open the 2 vertical zips on the sides.
At the same time on both sides, unlock the safety rail by sliding buttons with your finger (Step 1) and move the rail
upwards to take it out of the guide (Step 2).
OPEN
2
1
Insert the rail into the 2 lower anchor points, until you hear the safety clicks.
"CLICK"
"CLICK"
"CLICK"
10