Williams Sound Pocketalker 2.0 Mode D'emploi page 9

Internal Microphone
External Microphone
Jack
11. Adjust the tone according to your preferences. Turning the tone
control towards the top (+) boosts the treble (high frequency).
Clip
Turning the tone control towards the bottom (-) boosts the bass
(low frequency). The white dot on the dial indicates the normal
position (no treble or bass boost).
Tone Adjustment Dial
Pocketalker
®
Balance
Adjust
Left Right
(Mono)
More
treble
Adjust
More
bass
Using the built-in T-coil with a Loop System
The Pocketalker can be used with loop systems. When the T-coil
switch on the Pocketalker is enabled, the Pocketalker disables the
Headphone/
microphone input, picks up the loop signal, and sends the audio
Earphone
Jack
through the headphone jack.
Tone
Adjust
To use this feature:
Dial
Follow the "Getting Started" instructions and instead of step 8,
Tone Adjust
flip the T-coil switch to the "T-coil" position (up towards the T-coil
Rotary Dial
symbol). The T-coil "On" LED indicator above the switch will light
up.
All manuals and user guides at all-guides.com
2.0: Left Side View
Headphone/
Earphone
Balance
Jack
Control
(Fully
counter-
clockwise
= Mono)
Tone Adjust
Rotary Dial
Power On
Volume+
Adjust
Volume-
Power Off
Control
(Fully
counter-
clockwise
= Mono)
Power On
Tone
Volume+
Adj.
More
Tone
Dial
treble
Adjust
Adjust
Dial
Adjust
Volume-
Power Off
More
bass
Normal
position
(dot in
center)
Power "On"
Green LED
Power On/Off
and
Volume Adjust
Rotary Dial
T-coil
Switch
More
Dial
treble
Adjust
More
bass
Normal
position
(dot in
center)
Power "On"
Green LED
Power On/Off
and
Volume Adjust
Rotary Dial
T-coil
Switch
T-Coil Sy
Lanyard Slot
T-Coil "O
T-Coil Sw
(in "On" p
Charging
indicator
USB Micr
Charging
9