Satco NUVO 65-880 Instructions D'installation

LED SMALL WALL PACK WITH
EMERGENCY BATTERY BACKUP
Models: 65-880, 65-881
INSTALLATION AND SAFETY INSTRUCTIONS
WARNING: Risk of Fire or Electric Shock
•
follow all warnings and installation instructions before installing.
•
• To avoid electric shock, ensure power is turned off before installation or
inspection. All wiring must be installed in accordance with Electrical Code
and local electrical code.
•
circuit and minimum 90°C rated supply conductor.
• To prevent product malfunction and/or electrical shock, this product must
be properly grounded.
•
• To prevent wiring damage or abrasion, do not expose wiring to edges of
sheet metal or other sharp objects.
• Suitable for indoor/outdoor applications.
IMPORTANT:
This product must be installed in accordance with the
applicable installation code by a person familiar with the construction and
operation of the product and the hazards involved.
WIRING DIAGRAM
Check the light label for the wire color of DIM+ and DIM–
© Copyright 2023 Satco Products, Inc. 3/23 v1.3
(166mmW x 266mmH x 96mmD)
Color Temperature Adjustments
Be sure to set the desired color temperature inside the
• 3500K when the DIP switch is set to set to the left.
• 4000K when the DIP switch is set to set to the middle.
• 5000K when the DIP switch is set to the right.
1
Dimensions
6.5"W x 10.5"H x 3.75"D
Satco Products, Inc.
Brentwood, NY 11717