Publicité
Fig. 5a
5.
With the unit laying face down, measure from top left to bottom right and from top right to bottom left.
If the unit is square, the measurements will be equal. If one is longer, tap the bottom of the side panel
on the longer side until equal. See Figure 5A.
Place Back (Fa) on the unit. NOTE: The top and back legs have been grooved to position the back.
Attach back using 18 Philtruss Screws (L) through the pre-drilled holes into the top, each side
assembly and bottom shelf. See Figure 5B.
6.
Attach Tack Glide (M) to the bottom of each leg. See Figure 6. Turn your Westport Storage Bench
right-side up and enjoy!
All manuals and user guides at all-guides.com
L
M
M
Fa
Fig. 5b
Fig. 6
L
M
M
537KFDH — 09/08 — Page 5
Publicité
