Publicité
JBL Professional does not support suspension of the SoundFactor models covered by this manual nor are
these models intended for fixed installation in outdoor or high moisture environments. Moisture can damage
the speaker cone and surround and cause corrosion of electrical contacts. Avoid exposing the speakers to
direct moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prema-
turely dry out and finished surfaces may be degraded by long-term exposure to intense ultra-violet (UV) light.
SoundFactor speakers can generate considerable energy. When placed on a slippery surface such as pol-
ished wood or linoleum, the speaker may move due to its acoustical energy output. Precautions should be
taken to assure that the speaker does not fall off a stage or table on which it is placed.
Some SoundFactor speaker models include a 35mm receptacle cup to allow mounting on tripod stands or
use of a pole to mount a satellite speaker over a subwoofer. When using stands or poles, be sure to observe
the following precautions:
· Check the stand or pole specification to be certain it is designed to support the weight of the speaker.
· Observe all safety precautions specified by the stand manufacturer.
· Always verify that the stand or subwoofer is placed on a flat, level, and stable surface and be sure to fully
extend the legs of tripod type stands. Position the stand so that the legs do not present a trip hazard.
· Route cables so that performers, production crew, and audience will not trip over them and pull the
speaker over.
· Do not attempt to place more than one speaker on a stand designed for a single speaker.
· Always be cautious in windy, outdoor conditions. It may be necessary to place additional weight
(i.e. sandbags) on the base of the stand to add stability.
· Unless you are confident that you can handle the weight of the speaker, ask another person to help you
get it onto the tripod stand or pole.
Hearing damage, prolonged exposure to excessive SPL
SoundFactor loudspeakers are easily capable of generating sound pressure levels (SPL) sufficient to cause
permanent hearing damage to performers, production crew and audience members. Caution should be
taken to avoid prolonged exposure to SPL in excess of 90 dB.
Amplifier Module Precautions
Do not attempt to service this unit beyond instructions contained in this manual. Refer all servicing to a JBL
Professional Authorized Service Center. Serving is required when the apparatus has been damaged in any
way, such as power-supply input connector is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
Keep your SF22SP amplifier module away from sources of heat, such as a radiator or oven. Do not cover or
surround your SF22SP amplifier module with material that may retain heat, such as a blanket or curtain. Be
certain that the vents on the panel of the amplifier module are clear of all obstructions during operation.
WARNING - Shock Hazard: To reduce risk of fire or electric shock, do not expose this unit to rain or mois-
ture. Do not immerse your SF22SP amplifier module in any liquid. Do not operate your SF22SP near a pool,
bathtub or other standing water. Do not bypass or defeat the grounding or polarization means used on the
SF22SP amplifier module. Make sure all blades on the polarized power plug can be fully inserted into the
receptacle or other outlet that will be used with the unit. Your SF22SP amplifier module should be cleaned
only with a dry cloth. Take care of the power cord attached to your SF22SP amplifier module. Avoid situa-
tions where your cord might be stretched, pinched, or otherwise abused. Route it to avoid foot traffic. Pay
special attention to the cord connector and attachment points.
6
All manuals and user guides at all-guides.com
BEFORE YOU BEGIN
Publicité
