Publicité
Les langues disponibles
Les langues disponibles
SCREWS
Your GONG ALLVATOR is delivered with a screw/tool kit for mounting the foil adapted for the conne ction
between your foil and board.
Plugs are placed inside and on both sides of the mast to ensure watertightness.
The kit for all the ALLVATOR foils consists of the following:
1x M6-12 mm countersunk head
A
3x M6-16 mm countersunk head
B
1x M6-20 mm countersunk head
C
3x M6-35 mm countersunk head
D
4x M6-30 mm dome head
E
4x Washers
F
2x Pair of opened SCS brass nuts
G
4x M6-25 mm dome head
H
2x Pair of closed SCS brass nuts
J
>⃝●
1x Clé Torx
EN
front wing locking
wing - fuselage connection
front wing - fuselage connection
mast - fuselage connection
top plate - board connection
(Rigid Board ;
HIPE
CRUZADER)
top plate - board connection
top plate - board connection
(Rigid Board)
top plate - board connection
top plate -
board connection
(HIPE)
- 16
MOUTING THE FUSELAGE
⚠
Before proceeding with the mounting of the foil, we recommend the use of an anti-corrosion
product on all the screws threads.
❶
Connect the mast to the fuselage with the 3 M6-
50 mm screws
must face towards the square section of the
fuselage.
ADVICE ON FOIL PLACEMENT AND ADJUSTMENT
The US Boxes are placed so that the foils are in the optimal position in the centre of the US Boxes.
- further forward: the foil rises earlier and you need more front foot pressure. The foil is more reactive.
- further back: the foil is easier to control but less maneuverable and will take off later. At first you should set
the foil backwards and move it forward little by little as you progress to find the optimal setting.
(HIPE)
MOUNTING THE FRONT WING
❶
Slide the front wing on the fuselage. For better
tightening, proceed in the following order.
EN
⚠
❷
Start with screwing the rear screw (above the
. The thickest part of the mast
thinnest part of the mast) then the central screw
D
and only lastly the front screw. Tighten firmly and
repeat several tightening efforts on the 3 screws.
❷
First use the M6-20 mm
wing. Tighten firmly.
- 17
GONG-GALAXY.COM
GONG-GALAXY.COM
C
screw under the front
C
Publicité
