Kyocera DF-73 Manuel D'utilisation page 9

Types of modes
[printer]
Troubleshooting
(Paper jam, replenishing staples and
staple jam)
2. Remove any jammed paper there.
Offset ejection
This mode automatically shifts each set of
printouts to the right and left in order to
separate each individual set in a staggered
fashion.
Handling a paper jam
If a paper jam happens to occur, the
operation will stop, and an indication of the
cause of the jam will appear on the operation
panel of the copier (or the message display of
the printer).
3. Open the reversing unit cover and
remove any jammed paper inside that
cover.
A
B
C
D
A A
B
B
C
C
D
D
A
B
C
D
Stapling
This mode automatically staples each set of
printouts.
1. Push the finisher release button to
separate the Document Finisher from the
copier (or printer).
(A)
4. Check the lower portion of the Document
Finisher (A) and remove any jammed
paper from that area.
7