Publicité
Les langues disponibles
Les langues disponibles
Thus it can happen that the heat is not
distributed evenly.
To
get
good
recommend that the dimension of the
ferromagnetic area of the cookware
match the size of the burner.
We advise recipients having a flat base
(Fig.5A). This way you can use the power
optimally.
Do not use recipients with a rough base
to avoid scratching the thermal surface
of the top.
A very important factor in induction
cooking is the dimension of the pot
compared to the plate used (Fig.5B). The
cooking zones allow the use of recipients
with bases of various diameters.
It is, however, preferable to use the
appropriate
cooking
dimension of the pot.
USING THE COOKTOP
The appliance is operated using the
control panel sensor keys.
Functions are controlled by touching the
sensor keys and confirmed by displays
and acoustic signals. Touch the sensor
keys from above, without covering other
sensor keys.
• TOUCH CONTROL (Fig. 7)
G
F
E
key
A. On/Off
B. Control Lock key
C. Pause key
D. Booster key
E. Cooking Zone Slidebar
F. Programs key
G. Cooking zone Display
H. Timer [ ] key (increase)
I. Timer [ ] key (decrease)
L. Timer Display
cooking
results,
zone
for
L
min
I
D
B
A
• SWITCHING THE APPLIANCE ON
Press the On-Off key to switch the hob
on. All the displays relative to the cooking
we
zones switch on in the «0» standby
position. The control unit remains active
for 10 seconds. If no cooking zone is
selected within this time, the appliance
switches off automatically.
•AUTOMATIC POT DETECTION
This cooktop is fitted with an interactive
control system that makes it very
easy and comfortable to use. After
switching on the cooktop, when you
put a cookware on the glass, the control
system automatically detects it. This
system also automatically indicates you
which slider control to use by displaying
a «0» over it. You then just have to set the
the
desired cooking level. If the cookware is
removed, the display shows the symbol
« » and disappear when the cookware
is repositioned on the cooking zone,
continuing with the previous settings.
After use, always bring power to «0» (do
not leave on the symbol « »).
The symbol « » also appears on one of
the cooking zones displays when:
1)The recipient being used is not suitable
for induction cooking.
2)The diameter of the recipient used
is inferior to that allowed by the
appliance.
H
• SWITCHING A COOKING ZONE ON
Select the desired cooking zone and
press or slide on the corresponding
C
slidebar. The power of the single cooking
zone can be adjusted in 9 different
positions and will be shown on the
relative luminous display with a level from
«1» to «9». Slide right on the slidebar
to increase the power level, slide left to
decrease it.
• BOOSTER
This function further reduces the cooking
time of a certain cooking zone, by
bringing the temperature to the maximum
- 15 -
Publicité
