Bosch 02811917 Notice Originale page 18

18 | English
Cordless rotary hammer
– Masonry (with hollow core bit)
Weight according to EPTA-Procedure 01:2014
Length
Height
Recommended ambient temperature during char-
ging
Permitted ambient temperature during opera-
E)
tion and during storage
Compatible rechargeable batteries
Recommended rechargeable batteries for max-
imum performance
Recommended chargers
Data transfer
®
Bluetooth
Signal interval
G)
Max. signal range
A)
Measured at 20–25 °C with rechargeable battery
GBA 18V 12Ah.
B)
Pre-assembled
C)
Can be retrofitted
D)
Depends on battery in use
E)
Limited performance at temperatures < 0 °C
F)
The mobile devices must be compatible with Bluetooth
Low Energy devices (version 4.2) and support the Gen-
eric Access Profile (GAP).
G)
The signal range may vary greatly depending on ex-
ternal conditions, including the receiving device used.
The Bluetooth® range may be significantly weaker in-
side closed rooms and through metallic barriers (e.g.
walls, shelving units, cases, etc.).
Noise/Vibration Information
Noise emission values determined according
to EN IEC 62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 96 dB(A); sound power
level 107 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN IEC 62841-2-6:
Hammer drilling into concrete: a
h
2
Chiselling: a =7.3 m/s , K=1.5 m/s
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
1 609 92A 7MR | (09.11.2022)
D)
®
2 2
=12.3 m/s , K=1.5 m/s ,
2
,
GBH 18V-45 C
mm 125
kg 8.3–9.3
mm 545
mm 266
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
ProCORE18V... ≥ 5.5 Ah ProCORE18V... ≥ 5.5 Ah
GAL 18...
GAX 18...
GAL 36...
®
Bluetooth 4.2
F)
(Low Energy)
s 8
m 30
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Rechargeable battery
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
tery is included with the power tool by looking at the pack-
aging.
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: Lithium-ion rechargeable batteries are supplied par-
tially charged according to international transport regula-
GBH 18V-45 C
125
8.3–9.3
545
266
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
®
Bluetooth 4.2
F)
(Low Energy)
8
30
Bosch Power Tools