Thermador MASTERPIECE PROFESSIONAL WD30 Serie Instructions D'installation page 8

Cabinet Cutout Dimensions
Custom Drawer Front Dimensions
(Optional)
English 4
Instructions are based on standard American cabinets 36" (914 mm) high and 24"
(609 mm) deep with a 25" (635 mm) countertop. If using non-standard cabinets,
alter dimensions accordingly.
Cabinet opening bottom must be able to support 110 pounds (50 kg).
1/2" (12.7mm)
Frame Overlaps
Cabinet
B
1/2"
(12.7mm)
A
D
Dimension
A
B
C
Build custom drawer front to the dimensions specified in the following table. All four
edges must be finished. If using wood, the back must be sealed to prevent moisture
damage.
F
1-1/2" (38.1mm) min. to
opening above
D
Frame
Overlaps
Cabinet
Model
27" (685 mm)
25 3/8" (645 mm)
11 1/8" (283 mm)
24" (610 mm)
A
G
Pilot Holes
1/2" (12.7 mm)
Diameter Hole
Allow 3-1/2" (88.9mm) in front
for drawer handle clearance
C
Wall
Receptacle
30" (762 mm)
28 3/8" (721 mm)
11 1/8" (283 mm)
24" (610 mm)
E
B
C
D