Télécharger Imprimer la page

Yamaha NS-B20 Mode D'emploi page 4

Masquer les pouces Voir aussi pour NS-B20:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
Package contents................................................1
Installation ...........................................................1
Installing the front, center, and surround
speakers ...........................................................2
Installing the subwoofer.......................................2
Wall-mounting the speakers................................2
Make sure the package contains the following items.
Front and surround
speakers (NS-B20) x4
Non-skid pad
Before you connect the speakers and subwoofer, place
them in its respective location. This positioning is very
important as it affects the overall sound quality of the
system. Place the speakers in locations that will
optimize the sound quality at your listening position.
Refer to the illustration.
The position of the subwoofer is not as critical as the
position of the other speakers because sub-bass
sounds are not very directional. Refer to "Installing the
subwoofer" on page 2 for more information.
Note
• Placing the speakers too close to a CRT-type TV
may impair the picture color or cause a buzzing
noise. In this case, move the speakers at least 20 cm
(8") away from the TV. This is not an issue with LCD
and plasma TVs.
1
En
Contents
Package contents
Subwoofer
(NS-SWP20) x1
Non-skid pads: When
placing the speakers on
a flat surface, affix the
included non-skid pads
to the corners of the
speaker undersides, as
shown. The pads will
prevent the speaker
from moving around.
Installation
Method of connection....................................... 3
Connection diagram.............................................3
Connecting the power cables ..............................4
Troubleshooting ................................................. 4
Specifications...................................................... 4
Center speaker
(NS-C20) x1
Speaker cable 25 m (82 ft.) x1
(To be cut into 6 lengths for the
front, center, and surround
speakers and a subwoofer. Take
care to prevent injury when
preparing the cables.)
Non-skid pads (24 pcs.) x1
(For the front, center and surround
speakers. Including 4 spare non-skid pads.)
Front
left
Surround
left
Front
right
Center
Subwoofer
Surround
right

Publicité

loading

Ce manuel est également adapté pour:

Ns-c20Ns-swp20