kiwy S 123 Manuel D'instructions page 19

All manuals and user guides at all-guides.com
closer to the buckle of the safety belt (Fig.20).
Always check that the excess length of the safety belt is retracted by
accompanying the diagonal section of the belt in an upward
direction.
Make sure that the diagonal vehicle seat belt section passes over the
child's shoulder, but does not touch his/her neck.
To reach the right belt position, you can easily adjust the backrest
height by following the operations described (Fig.21).
FIXING THE CAR SEAT - FROM 22 TO 36 KG
(Application range from 5 to 11 years of age approximately).
Converting to a booster seat
Removing the backrest
Your child seat may become a booster seat. Press and hold down the
backrest adjustment button on the top of the backrest (1). Pull the
backrest up (2) and lift it off the car seat. Store your backrest in a safe
place (Fig.22).
When refitting the backrest hold down the backrest adjustment
button (1). Check that the backrest is correctly fitted by pulling it
upwards.
Fitting the seat belt guide to the booster seat ( Fig. 24-27).
WARNING!
The booster seat can be used with or without the shoulder belt guide.
Once the backrest is removed you will need to fit the seat belt guide
to meet the booster seat. Slot the small buckle on the end of the
shoulder belt guide strap through one of the two sides under the
booster seat ( Fig.24).
Use the slot closest to the seatbelt buckle when the booster seat is
correctly placed onto the car seat.
Rotate the backrest insert under the booster seat (Fig.23).
Place the booster seat on the appropriate vehicle seat. Ensure the
vehicle seat is upright and adjusted to the rearmost position.
Press the booster seat firmly into the vehicle seat.
9