Sony KV-XF21M8J Mode D'emploi page 5

Notes
• If you connect a monaural VCR, connect the yellow plug to
• If you connect a VCR to the ˘ (antenna) terminal, preset the signal output
• When no signal is input to the connected video equipment, the TV screen
CAUTION
Do not connect the power cord until all other connections are complete;
otherwise, a minimal current leakage through the antenna and/or other terminals
to the ground could occur.
Step 2
Insert the batteries
into the remote
Note
• Do not use old batteries or different types of batteries together.
Step 3
Preset the channels automatically
Front of TV
ONE-PUSH AUTOMATIC PROGRAMING
Tips
• If you want to stop automatic channel presetting, press SELECT twice.
• If an unwanted channel has been preset or you cannot preset a particular
Note
• During automatic channel presetting, the TV screen displays either B/G, I, D/
Now You Are Ready. . .
To watch the TV, see page 11.
jack) and the black plug to
from the VCR to the program number 0 on the TV.
becomes blue.
1
2
ONE-PUSH AUTOMATIC PROGRAMMING
channel, preset your TV manually (see page 9).
K, or M, depending on the setting of program number "1" (see page 8).
-L (MONO) (the white jack).
VHF LOW B/G
(the yellow
1 1
Using Your New TV
5