Cleaning The Drain Pump Filter - LG WM3477HW Guide De L'utilisateur Et D'installation

C A R E A N D C L E A N I N G C A R E A N D C L E A N I N G
MAINTENANCE

Cleaning the Drain Pump Filter

Lint and other objects may accumulate and clog
the drain pump filter. If the washer fails to drain
properly, unplug the washer and allow the water
to cool, if necessary, before proceeding.
1
Open the drain pump filter access panel.
3
Remove the plug from the drain hose, and
allow the water to drain completely.
Twist the pump filter counterclockwise to
remove. Remove any lint and foreign objects
from the pump filter.
Reverse the above steps to reinstall the drain
pump filter and drain hose. Be sure to close
the cover panel when finished.
28
(cont.)
Pump
Filter
Plug
Unclip the drain hose and pull it out. Place
2
the end of the drain hose in a pan, bucket, or
floor drain to catch the water.
wWARNING:
• Unplug the power cord before cleaning.
Failure to do so may cause electric shock.
• Opening the drain filter will result in water
overflowing if there is water in the washer
tub. Make sure to check if the water is
completely drained before opening the drain
filter.
• If you use the washing machine with the
drain filter reassembled incorrectly after
cleaning it, or if you use the machine without
the filter, it may cause leaks or malfunction
of the washing machine.
2
1
Drain Hose