Putting Into Operation, Fully Charging The Battery - getemed PhysioMem PM 100 2G Instructions D'utilisation

Control Elements, Putting into Operation
Fig. 4. Back of the recorder with electrodes
4.2

Putting into Operation, Fully Charging the Battery

NOTE
If the ambient temperature is lower than 0 °C, the device should not
be charged.
The device has a built-in rechargeable battery, which is charged by
inductive coupling with the charging pad.
Before first use of the device, the battery has to be fully charged.
Use the USB cable to connect the included charging pad (Fig. 5) to
the power supply plug and connect this to the mains supply. Then
place the PhysioMem on the charging pad.
77811022 PhysioMem PM 100 2G 19
®