Publicité
Les langues disponibles
Les langues disponibles
KB101
KB111-SSWM
Installation Instructions
&
Vertical Surface Mounted Baby Changing Stations
Step 1.
Remove changing station from the shipping container and check for any freight damage.
Identify the best location for installing the unit. Hold the unit in place and open the bed. Make
sure you have taken the operating clearance into consideration.
Step 2.
Determine the best method of mounting based on the type of wall. You may have left over
hardware when you have finished installation.
Step 3.
The vertical unit has four mounting holes provided in the back wall, positioned on a 16" (406
mm) stud center.
If possible, locate the wood or metal wall studs for fastening the unit in the desired location.
If the walls do not have studs on center as outlined, make sure at least one side of the unit is
installed into the stud.
2
Publicité
