Danby DBD5L Guide D'utilisation page 14

CONNECTING THE BEVERAGE DISPENSER
CONNECTING THE CONTAINER TO THE
BEVERAGE DISPENSER
6. Insert the container into the center of the unit.
7. Attach the AIR-CONNECT TUBE to the "AIR IN"
valve in the WHITE ADAPTER (See Figure 15 ).
8. Attach the DISPENSING TUBE to the "DRINK
OUT" valve in the WHITE ADAPTER
(See Figure 15 ).
9. Make sure there are no kinks in the TUBES. There
needs to be an even flow from the unit to the
container and an even liquid flow from the container
to the tap.
Also, make sure the container is centered in the
cooling compartment of the unit. This ensures even
cooling throughout.
TURN ON THE AIR PRESSURE
10. Turn on the air pressure by moving the switch to
the ON position (See Figure 16 ).
CLOSE THE LID
To turn on the power, please refer to " Switching on
the Power " on page 15.
Preparing The Container
USING THE WHITE ADAPTER (continued)
DRINK OUT
Figure 15
Figure 16
14
AIR IN
n
AIR ON/OFF
SWITCH