Vision TECHCONNECT TC-HDMI31 Mode D'emploi page 7

SPECIFICATIONS
PRODUCT DIMENSIONS: 160 x 50 x 20 mm / 6.3" x 2.0" x 0.8" (length x width x height)
PACKAGED DIMENSIONS: 200 x 150 x 80 mm / 7.9" x 5.9" x 3.2"
PRODUCT WEIGHT: 0.23 kg / 0.5 lb
PACKAGED WEIGHT: 0.74 kg / 1.63 lb
CONSTRUCTION MATERIAL: Metal
COLOUR: White
TECHNICAL DETAILS:
Bandwidth: 18Gbps (6Gbps/TDMS Channel)
Maximum pixel clock: 600 MHz
Input Video Signal: 3.0-3.3 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Video Impedance: 100 Ohms
Audio Formats Supported: Standard, DSD (Direct Stream Digital), HD (HBR)
Maximum Video Format Supported: 4K@60Hz, 12 bit, Deep Colour, Lip Sync
HDMI Version: 2.0
HDCP Version: 2.2
ESD Protection: ± 4kV (contact discharge through user)
Operating Temperature Range: 0-60°C (32-140 °F)
Operating Humidity Range: 10-90 % RH (no condensation)
Power Consumption: 10 watts (Max.)
INPUTS:
3 x HDMI (type A)
1 x RS-232 (male 9-pin D-sub)
OUTPUTS:
1 x HDMI (type A)
POWER SUPPLY: 100-240v 50/60Hz AC 5 volt / 1 amp
FJ (Fujia). Transformer integrated into plug. Includes interchangeable plugs: UK/EU/US/AU. DC
tail length: 1.8m. Transformer dimensions: 66 x 43 x 32 mm / 2.6" x 1.7" x 1.3"
ADDITIONAL INDIAN POWER SUPPLY: 100-240v 50/60Hz AC 5 volt / 2 amp
BX (Borasen). Transformer integrated into plug. DC tail length: 1.5m. Transformer
dimensions: 73 x 40 x 50 mm / 2.9" x 1.6" x 2.0"
ACCESSORIES INCLUDED:
1 x IR Remote Control (Battery included CR2025)
1 x Fixing Adhesive strip
1 x 9-Pin D-Sub Serial Cable 0.75 m (2.5 ft) female to female
WARRANTY: Lifetime return-to-base, 2 years onsite (UK only)
PSU COMPLIANCE: RoHS, WEEE, CB Certification, BIS CRS, BSMI, CCC, CE/EMC, cUL, EAC, FCC,
KCC, Kvalitet, PSE, RCM, SAA, C-TICK, SDoC, S-Mark, UkrTEST
SWITCHER COMPLIANCE: RoHS, WEEE, CE/EMC, BSMI, CB Certification, C-TICK , EAC, FCC,
IEC, KCC
SPARE POWER SUPPLY UNIT (PSU): TC2 P5V2A [SAP:2940996]
7
TC-HDMI31_manual_en