Vision TECHCONNECT TC-HDMI31 Mode D'emploi page 2

DECLARATION OF CONFORMITY
Where applicable Vision products are certified and comply with all known local regulations to a
'CB Certification' standard. Vision commits to ensure all products are fully compliant with all
applicable certification standards for sale in the EU and other participating countries.
The product described in this owner manual is in compliance with RoHS (EU directive
2002/95/EC), and WEEE (EU directive 2002/96/EC) standards. This product should be returned
to the place of purchase at the end of its useful life for recycling.
WARNINGS
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE.
All products are designed and imported into the EU by 'Vision' who is wholly owned by 'TD
Synnex.', Registered in England Nr. 04625566 at Redwood 2, Chineham Business Park,
Crockford Lane, Basingstoke, Hampshire RG24 8WQ, United Kingdom. WEEE Registration:
GD0046SY
DECLARATION OF ORIGIN
All Vision products are made in the People's Republic of China (PRC).
2
TC-HDMI31_manual_en