Declaration Of Conformity - Dreve EyeVolution MAX Mode D'emploi

3. Declaration of Conformity

Herewith we declare that the machine described below in its conception and design and in the
shape delivered by us is in accordance with the fundamental requirements for safety and health
as prescribed in the applicable EC directives.
In the case of any change or modification of the machine, not authorised by us, this declaration
becomes invalid.
Machine designation:
Type of unit:
Applicable EC Directives:
2004/108/EG
Applied harmonised standards:
2004/108/EG
EN 61000-3-2:2010-03
+ Corrigendum to
EN 61000-3-2:2011-06
EN 61000-3-3:2013
EN 61326:1:2013
Dreve Dentamid GmbH · Max-Planck-Straße 31 · 59423 Unna/Germany
Tel.: +49 2303 8807-0 · Fax: +49 2303 8807-55 · dentamid@dreve.de · www.dreve.com/dentamid
EyeVolution MAX
®
D-38101
Light polymerization unit
EMC Directive
EMC Directive
Electromagnetic compatibility (EMC) – Part 3-2: Limits – Limits
for harmonic current emissions (equipment input current
<= 16 A per phase) (IEC 61000-3-2:2005 + A1:2008 +
A2:2009); German version EN 61000-3-2:2006 + A1:2009 +
A2:2009.
Electromagnetic compatibility (EMC) – Part 3-3: Limits – Limita-
tion of voltage changes, voltage fluctuations and flicker in public
low-voltage supply systems, for equipment with rated current
<=16 A per phase and not subject to conditional connection
(IEC 61000-3-3:2013); German version EN 61000-3-3:2013.
Electrical equipment for measurement, control and laboratory
use – EMC requirements – Part 1: General requirements (IEC
61326-1:2012); German version EN 61326-1:2013 Emission
according to living area, business and industrial undertakings
as well as small enterprises interference stability according to
industrial area.
19