Publicité
Les langues disponibles
Les langues disponibles
BT device Pairing
•
When switched to BT mode, the device will goes for reconnect/pairing
mode automatically.
•
Then, activate the BT function in your BT device (such as Mobile Phone
or Personal Computer). the device will enter to BT searching mode
automatically, if not, taps the related selection to manually enter to
searching mode. (refer to your device's manual when necessary)
•
Your mobile device should show "BTS49" in BT list, and then select it for
pairing. Waiting for some seconds and will see connected message as
shown on your mobile device. (For some BT devices. You may need to
input "0000" as pairing password)
•
If pairing is successful, a beep will sound, the "BT" icon light change to
solid from blinking.
•
Now, you can start to music play from the mobile device by its music
player program.
Disconnect from paired device
•
To disconnect with paired device and for better result.
•
Long press the "PHONE (6)" button to disconnect directly and a series
of tones will sound as identify.
•
Or, you can choose "Disconnect" from BT paired device list on your
mobile device.
•
In this case. the BT Kitchen Clock Speaker will turn back into
"Searching/Pairing" mode in seconds, a series of tones will sound and
the "BT" icon will turn to blinking again from solid.
•
Now, you can process for new mobile device pair or power Off the BT
Speaker if you wanted.
Searcing for last paired device
•
Every time you turn On the device and switch to BT mode.
•
it will firstly search for the mobile device which has been paired
previously and still in record.
•
The device will reconnect this mobile device as priority if it's in BT
searching device mode and in connection range.
•
If no device found in some seconds, the device will automatically turn
into pairing mode.
•
Now you can process for new mobile device pair.
All manuals and user guides at all-guides.com
EN
29
Publicité
