Worx WX041 Notice Originale page 8

PLUG REPLACEMENT (UK &
IRELAND ONLy)
If you need to replace the fitted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of
this appliance may not correspond with the
coloured markings identifying the terminals in
your plug, proceed as follows. The wire which
is coloured
blue must be connected to the terminal which
is marked with N. The wire which is coloured
brown must be connected to the terminal
which is marked with L.
wARNING: Never connect live or
neutral wires to the earth terminal of the
plug. Only fit an approved bS1363/A plug and
the correct rated fuse.
NOTE: If a moulded plug is fitted and has to
be removed take great care in disposing of the
8 8
plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Connect
Blue to N
(neutral)
Outer sleeve
firmly clamped
Heat gun
All manuals and user guides at all-guides.com
13 Amp fuse approved
to BS1362
Brown L (live)
Cable grip
DECLARATION Of
CONfORMITy
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
declare that the product
description wORX Heat gun
Type wX041
Complies with the following directive:
Machinery directive 2006/42/Ec
Electromagnetic compatibility directive
2004/108/Ec
RoHS directive 2011/65/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 61000-3-2
EN 61000-3-3
EN 60335-1
EN 60335-2-45
EN 62233
2013/01/11
Leo Yue
POSITEC Quality Manager
EN