LaserLiner BeamControl-Maste Mode D'emploi page 16

Adjust horizontal
Start adjusting the vial (X) by turning the
levelling screws (A) and (B).
!
Please look always vertically at the vial
in order to avoid reading errors.
Now turn the levelling screw (C) to adjust
the vial (Y).
!
Repeat the whole action, if necessary.
Adjust vertical
Set the BCM up vertically on its integral
handles or mount the BCM onto a stand.
Now adjust only the vial (Z) with the
levelling screw (C).
Operation
Switch on BCM:
Hold the key
„On/Off" pressed for 1 second, the head of BCM starts
rotating, the rotation mode is activated.
1. Spot mode:
The rotation laser sends out a laser beam
exactly to thans ofe point over a great
distance. In order to get into the spot mode
reduce the speed by me to zero.
Change position
on rotation laser
with SensoCommander
16 EN
All manuals and user guides at all-guides.com
.
A
vial X
vial Z
B
vial Y
C
C