Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
•
Warning! Contact with or inhalation of dusts
arising from sanding applications may
endanger the health of the operator and
possible bystanders. Wear a dust mask
specifically designed for protection against
dust and fumes and ensure that persons
within or entering the work area are also
protected.
•
Thoroughly remove all dust after sanding.
•
Take special care when sanding paint which
is possibly lead based or when sanding
some woods and metal which may produce
toxic dust:
- Do not let children or pregnant women
enter the work area.
- Do not eat, drink or smoke in the work
area.
- Dispose of dust particles and any other
debris safely.
•
This tool is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety. Children should
be supervised to ensure that they do not play
with the appliance.
•
The intended use is described in this
instruction manual. The use of any
accessory or attachment or performance of
any operation with this tool other than those
recommended in this instruction manual may
present a risk of personal injury and/or
damage to property.
6
All manuals and user guides at all-guides.com
Safety of others
•
•
Vibration
The declared vibration emission values stated in
the technical data and the declaration of
conformity have been measured in accordance
with a standard test method provided by EN
60745 and may be used for comparing one tool
with another. The declared vibration emission
value may also be used in a preliminary
assessment of exposure.
Warning! The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which
the tool is used. The vibration level may increase
above the level stated.
When assessing vibration exposure to determine
safety measures required by 2002/44/EC to
protect persons regularly using power tools in
employment, an estimation of vibration exposure
should consider, the actual conditions of use and
the way the tool is used, including taking account
of all parts of the operating cycle such as the
times when the tool is switched off and when it is
running idle in addition to the trigger time.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by
a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
Publicité
