Audio Setting - LENCO BRP-1150 Mode D'emploi

3. Color Space: Selects the color display used by the TV. Select to match your TV's specification
for the best image quality.
4. HDMI Deep Color: Selects the color range for HDMI. Select to match your TV's specification
to ensure the best display of colors.
5. HDMI 1080 24Hz: Enable/disable the 24Hz setting. Only enable this on capable displays. If
the motion in a movie seems odd, disable this option.
Video Processing
1. Video Adjust: Enter a submenu to adjust display settings.
Adjust the Brightness, Contrast, Hue and Saturation of the screen.
2. Sharpness: Select how sharp details in video should appear.
Audio Setting
1. HDMI: Selects the audio mode used when HDMI is connected. Select Bitstream if the device
the Blu‐ray player is connected to supports audio decoding. Otherwise, select PCM. You can
also turn audio output off.
2. Down Sampling: Selects down sampling. Select this when the device connected to the
Blu‐ray player is not 96KHz compatible)
3. Dolby DRC: Set Dynamic range control on or off, or let the device decide. This option raises
the volume of voices that otherwise might be drowned out by music or ambient sound.
Clean Discs
Wipe your discs with a microfiber cleaning cloth from the centre to the edge in straight line
movements.
Note
To prevent possible damage to this product, do not turn off the power or remove the USB flash
drive while a software update is in progress.
Caution
Never use solvents such as benzene, thinner, commercially available cleaners, or anti‐static sprays
intended for discs to clean the player.
17