Operating With The Remote Control; Quick Starting Guide - LENCO BRP-1150 Mode D'emploi

(30) ZOOM: Zoom in or out.
(31) STOP: Stop playback.
(32) PLAY/PAUSE: Start (resume) / pause / go to normal speed during fast forward / rewind.
(33) PREV: Skip to the previous title, chapter or track.
(34) NEXT: Skip to the next title, chapter or track.
Operating with the remote control
1. The remote control must point at the remote sensor in order
for the DVD player to function correctly.
2. The remote works best at a distance less than 5 meters and at
an angle of up to +/‐30° toward the front of the unit.
3. There should be no obstacles in between the remote control
and the remote sensor on the main unit.
Quick Starting Guide
1. Connecting to an External Power Source
Connect the power adapter (supplied with the player) to the side input and to a wall outlet.
Do not use any other device other than specified by your dealer.
2. Open the screen panel.
The screen panel of the portable DVD opens to a maximum 180°. And it can rotate 270°.
3. Press the OPEN button in the center to open the disc cover.
4. Insert a Blu‐ray disc or DVD with the label side facing upwards.
Align the center of the DVD disc with the center of the disc slot. Press the DVD gently down
to snap the disc into place, then close the disc cover.
5. Slide the power switch on the right side of the unit towards you to power it on.
6. Press the OK or PLAY/PAUSE button on the unit to start playback.
The player will immediately start playing the DVD or BD.
When you want to stop, press the STOP button, the player will go to the device main menu.
The player can be recharged during use.
9