Maintenance; Cleaning/Replacing The Filter; General Maintenance - Ryobi 18 VOLT DRY HAND VAC Manuel D'utilisation

This product contains no serviceable parts.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which could result in serious personal
injury.
NOTE: ILLUSTRATIONS START ON PAGE 7 AFTER

MAINTENANCE

FRENCH AND SPANISH LANGUAGE SECTIONS.

CLEANING/REPLACING THE FILTER

See Figure 7, page 8.
 Remove the battery pack and the dust bowl.
 Remove the filter by pressing the tabs inward and lifting
the filter out of the screen assembly.
 Shake or lightly brush any dust or dirt off the filter.
 Remove the screen assembly from the dust bowl.
 Shake or lightly brush any dust off the screen and screen
assembly. Wash if necessary.
 Empty the dust bowl; wash if necessary. Before reattach-
ing to the hand vac, make sure all pieces are completely
dry.
When purchasing replacement filter, request recommended
part number 533907001 (model no. A32VC04).
6 — English