Jeulin UT51 Manuel D'instructions page 16

Measurement and instrumentation
UT51 multimeter
Ref :
291016
ENGLISH
All manuals and user guides at all-guides.com
Replacing the fuse
If no current measurements are possible, it could be that an overload safety
fuse has blown. To access the fuse, remove the two screws located at the
back of the device (under the rubber stops) and lift the battery compartment.
Replace only with a similar fuse, that is a fast acting 0.3 A / 250 V fuse ( 5 x
20 mm).
7 After-sales service
The device is under a 2-year guarantee, it must be sent back to our
workshops.
For any repairs, adjustments or spare parts please contact:
JEULIN – TECHNICAL SUPPORT
27 019 EVREUX CEDEX FRANCE
15
Rue Jacques Monod
BP 1900
+33 (0)2 32 29 40 50