Publicité
Les langues disponibles
Les langues disponibles
12
English
Dental professionals recommend brushing no less than 2 minutes
twice a day.
Easy-start
The Easy-start feature gently increases the power over the first
14 brushings to help you get used to the brushing with the Philips
Sonicare. The Easy-start feature only works in Clean and White
modes. This Philips Sonicare model comes with the Easy-start feature
activated.
Activating or deactivating the Easy-start feature
1
Attach the brush head to the handle.
2 Place the handle on the charging platform.
To activate Easy-start:
Press and hold the power on/off and mode button for 2 seconds.
You hear 2 beeps to indicate that the Easy-start feature has been
activated.
To deactivate Easy-start:
Press and hold the power on/off and mode button for 2 seconds.
You hear 1 beep to indicate that the Easy-start feature has been
deactivated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly move through the Easy-start ramp-up cycle.
Traveling with the appliance
1
Open the travel case and remove the middle insert.
2 Place the charger base and wall adapter in the bottom of the case.
3 Insert the toothbrush handle underneath the elastic band in the
middle insert to ensure the handle stays in place while traveling.
4 Place the middle insert back into the travel case.
5 Brush heads can be stored in the netted pouch of the travel case.
35_021_1528_1_Booklet_A6_v1.indd 12
12/07/16 10:41
Publicité
