Publicité
Les langues disponibles
Les langues disponibles
CAUTION: As the unit switches from the sterilization to the
drying cycle, it is expected to see a large initial release of steam
as the fan turns on. Keep a safe distance from the unit while this
cycle is in process.
C. When the drying cycle is complete, the appliance will beep 5 times and
switch off automatically.
Sterilize Only
A. Press the Sterilize Only Button. The appliance will beep one time and the sterilization
cycle will start.
Note: If there is not enough water added, incomplete sterilization may occur. If the unit
was not able to sterilize completely, it will beep and the indicator light will flash for one
hour. If this happens, wait 10 minutes to allow unit to cool, then add water to the
solid FILL LINE of the measuring cup (110 mL), pour the water onto the heating plate
and restart the sterilization cycle.
WARNING: DO NOT open lid or reach over the appliance while in
use, as steam will cause burns and serious injuries. DO NOT touch
hot surfaces, including lid, tray and lower rack, during or immediately
after use.
B. When the sterilization cycle is complete, the appliance will beep 5 times and
switch off automatically.
Note: This cycle lasts approximately 9 minutes but may vary by the amount of
water you add, the number of items to be sterilized and other environmental factors.
CAUTION: Wait 10 minutes for parts to cool, then open lid carefully
by handle and beware of residual steam.
Dry Only
A. Press the Dry Only Button. The appliance will beep one time and the drying cycle
will start.
B. When the drying cycle is complete, the appliance will beep 5 times and
switch off automatically. This cycle lasts approximately 45 minutes.
Note: Any cycle can be stopped at any time by pressing the power button.
CAUTION: If it is necessary to drain water always
POUR AWAY FROM YOU, as shown by the symbol
on base.
Publicité
