Publicité
Introduction
The NWA-8500 is an access point that receives power from a
PoE (power over Ethernet) WLAN controller. The NWA-8500
does not require a power adapter or power cord. You can just
deploy the NWA-8500 in your wireless network with a PoE
wireless switch. Through the NWA-8500 (labeled AP in the
following figure), wireless clients on the WLAN can access
the Internet or the wired network.
This guide shows you how to connect the NWA-8500 to a
WLAN controller and hang your NWA-8500 on a wall.
1 Hardware Connections
Follow the steps below to connect your NWA-8500 for
Internet access.
All manuals and user guides at all-guides.com
ENGLISH
ENGLISH
1
Publicité
