Astralpool 75799 Notice D'installation Et D'utilisation page 3

Command Connect - English
Wiring
Smart Relay
Bluetooth®
Zigbee
2. Cable specifications
Cable for the lights
For the lights, follow the instructions of the manufacturer. Use cable type and section recommended in the instructions
for the lights.
Cable for the pump circuit
For the motor, follow the instructions of the motor manufacturer. Use cable type and section recommended in the
motor instructions. It must adapt to the power of the motor and the length of the cable.
3. Packaging contents
• 1 connected electric power center
• 4 screws & 4 plugs (sachet)
• Documentation (this manual, wiring diagrams & DoC)
Command Connect boxes are equipped with "Smart Relays" that allow you to connect your pool equipment*. They
can be controlled via Bluetooth® using the free Fluidra Pool app available from App Store® and Google Play™.
* Smart Relays are specially designed to control the pool's lighting and filter pump.
4. Using the Command Connect box
Command Connect boxes are provided with two 3-position switches for manually controlling the pool equipment.
0
230V – 50Hz, 10A max, 2300 W max resistive load, consumption <1W
BLE V5.2, 2.4 GHz, max power 100 mW
2.402-2.481 GHz band, +10 dBm max radio power
Automatic mode enabling
AUTO/
control via the
REMOTE
o
Fluidra Po l app
OFF
Switched off
Manual mode (forced
MANU
activation)
Cable glands
• Access to the entire range of functions
for controlling Command Connect
cabinets can only be obtained through
the Fluidra Pool app.
• To turn the system on for the first time,
simply use the 2 manual switches to
switch the equipment ON and OFF.
3