Publicité
Les langues disponibles
Les langues disponibles
Helpful tips for
installation
Since the detector is in response to
temperature change, please avoid
the following conditions (See FIG.4)
•
Avoid aiming the detector
toward the objects which may
be swayed in the wind, such as
curtain, tall plants, miniature
garden, etc.
•
Avoid aiming the detector
toward the objects whose
surface are highly reflective, such
as mirror, monitor, etc.
•
Avoid mounting the detector
near heat sources, such as
heating vents, air conditioning,
vents as dryers, lights, etc.
FIG.4-A
Additional Function and
Wiring
Manual on swithing with push
button switch
The load can be manually switched
on by using an external push
www.grupotemper.com
All manuals and user guides at all-guides.com
FIG.4-B
KDP1 360 FP
Presence detector
button switch (N.C. ≧ 10A type, See
FIG.5-FIG.6).
When the load is off, it can be
switched on by a short press ( ≤1sec)
on push button switch and Lux is
disabled. After the load is switched
on manually, the load can be
automatically switched off if no
movement is detected and the delay
time has expired.
Ambient light appraisal
According to the changeable
ambient light level, detector can
postpone load's delay time
of turning on and off to avoid
unnecessarily turning on or off load
due to rapid ambient light change:
Ambient light level changes from
bright to dark: If the ambient light
level keeps be lower than the preset
Lux value for 10sec, the light will
be automatically switched on after
10sec. (LED will be on 10sec for
indication)
Ambient light level changes from
dark to bright: If the ambient light
level continuously exceeds the switch
off Lux value for 5min, there are
different reactions according to the
time setting value.
Time setting ≧ 5min, the light will be
automatically switched off after
5min.
Time setting < 5min, the light will be
automatically switched off when
the set time reached if no movement
Instructions manual |
67
Publicité
