Wetelux 90 08 27 Mode D'emploi page 18

liquids may accumulate. Please keep a minimum dis-
tance of 5 m to swimming pools, ponds etc.

The floodlight must not be mounted on or near flamma-
ble surfaces.

The LED floodlight should not be mounted near flam-
mable and moving objects, such as furniture, decorative
material, curtains, candles, etc.

Mount the LED floodlight only on a stable surface
(wall/ceiling). The installation site must be stable and
must not be exposed to vibrations. Depending on the
substrate, use suitable screws and dowels.

The LED floodlight must be protected on the sub-
distribution board by a 10/16A fuse. An earth leakage
circuit breaker must be installed before this (FI protec-
tive switch).

The LED floodlight must be disconnected from the pow-
er supply during installation. It is not sufficient to just
turn off at the light switch!

Turn the power off by removing the corresponding cir-
cuit fuse or switch off at the circuit breaker. Secure it
against an unauthorised re-start, e.g. with a danger
sign. In addition, switch off the associated earth-leakage
circuit breaker.

Check that the mains connection is current free with a
suitable tester.

The earth protection cable must be connected when
installing the LED floodlight.
Operation
14