Kaiterra Sensedge Mini Mode D'emploi page 3

Sensedge Mini User Manual
What's Included
Sensedge Mini Sensedge Mini
sensor modules x 2
Electrical box Electrical box screws
screws (US) x 2 (China and EU) x 2
User Manual Certificate of
calibration and testing
Important Safeguards
Please read the safety warnings before use and take the necessary precautions to reduce the risk of
fire, electric shock, or injury. The Kaiterra limited warranty applies only if the unit is used according
to these instructions.
WARNING
·
To reduce safety risks, always use service personnel from the manufacturer or service provider, or
other qualified personnel for installation and maintenance.
·
Make sure the power is OFF during installation or maintenance.
·
DO NOT tamper with or use nonofficial spare parts for repair or maintenance.
·
DO NOT use the device in environments with high humidity or possible direct exposure to water.
·
DO NOT use the device in an outdoor environment.
·
DO NOT use the device near heat sources such as radiators, furnaces, ovens, or stoves.
1
Surface / Drywall Electrical box Drywall screws and
mount mount anchors (3 pairs)
Fastening USB cable Charger
screws x 2
Certificate
of conformity
Getting Started
The Sensedge Mini is a building-grade air quality monitor. This user manual will provide a basic guide
to its first use. Further information can be found on the Kaiterra Support Portal at
http://support.kaiterra.com/sensedge-mini
1 3 4 5 2
6 7
Externals and Air Flow
Air is drawn into the Sensedge Mini from the lower side, as well as the air intake on the upper side. It
is vital that neither side of the device is covered. Any changes in airflow may affect the readings and
accuracy.
Power and Connectivity
The Sensedge Mini provides multiple power and connectivity options:
Power:
·
USB-C: Only use the cable and charger/adapter supplied with the device
·
DC direct wiring: Used for power supply of 12-30V DC
·
PoE (Power over Ethernet): Available for model SE000200P
Connectivity:
·
2.4GHz Wi-Fi (802.11 b/g/n)
·
Ethernet: Used for data transfer via Ethernet
·
RS-485: Used for Modbus communication
8 9 10
Air intake
Module status light
1 6
USB-C
Module
2 7
STATUS light RS-485
3 8
RESET pinhole Direct wiring
4 9
ON/OFF switch
Ethernet port
5 10
2