Philips 42PF9945/12 Mode D'emploi page 4

Preparation
&
Wall mounting instructions
For the wall mounting instructions follow the
separate template.
Make sure that the wall mount is being fixed
securely enough so that it meets safety
standards.The weight of the TV (excl.
packaging) is about 40 kg.
Note: not supplied stands are optional accessories.
Consult your dealer.
é
Place or hang the TV wherever you want, but
make sure that air can circulate freely through
the ventilation slots. Do not install the TV in a
confined space such as a book case or a
simular unit.
To prevent any unsafe situations, no naked
flame sources, such as lighted candles, should
be placed on or in the vicinity. Avoid heat,
direct sunlight and exposure to rain or water.
The equipment shall not be exposed to
dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on it.
"
Insert the aerial plug firmly into the aerial
socket x at the bottom of the TV. For best
picture quality use the suppressor-aerial cable
supplied.
Keys on top of the TV
- V +
MENU/OK
Picture
TV
Setup
Demo
Install
Exit
2
m in .
1 m
Should your remote be lost or broken you can still
change some of the basic settings with the keys on top
of your TV.
Press:
• the V
• the
The
menu without the remote control.
- +
P/CH Use:
• the V - and + keys and the
Sound Features
• the
Note:
When activated via the
only
Navigate to
'
To connect your computer, see p. 20.
To connect other peripherals, see p. 17.
If you dispose of a Cinema Link combination
(Cinema Link Audio receiver and/or Cinema
Link video recorder and/or DVD player), see
the separate supplied instruction manual.
In order to obtain the best result, please use
only the supplied antenna cables between the
TV and videorecorder, and between
videorecorder and antenna connector.
( Insert the mains cord supplied into the mains
at the bottom of the TV and in the wall socket
having a mains voltage of 220-240V.
To prevent damaging the power (AC) cord
which could cause a fire or electric shock, do
not place the TV on the cord.
§
: Insert the 2 batteries
Remote control
supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy
metals mercury and cadmium. Please check on how
to dispose of exhausted batteries according to local
regulations.
: Press the power switch B
è
Switch the TV on
at the right side of the TV.
An indicator on the front of the TV lights up
and the screen comes on. If the TV is in
standby mode, press the
key on the remote control.
or key to adjust the volume;
- +
keys to select the TV channels or sources.
-P/CH+
key can be used to summon the main
MENU/OK
to select menu items in the directions as shown;
key to confirm your selection.
MENU/OK
MENU/OK
lets you dismiss the menu.
Exit
Exit and press the
keys or the B
-P+
and keys
P/CH- P/CH+
key on top of the TV,
key.
MENU/OK