Publicité
GANGING CABINETS
Before beginning installation remove and set the door aside in a safe place.
NOTE: The cardboard sleeve attached to the door protects the edges and corners of the door during installation.
1. Remove door from cabinet by taking the hinges off of the mounting plates.
2. On a flat surface, lay the cabinet boxes side by side and attach to one another using the ganging blocks [R349-01-375M] and
screws [SS676].
1
2
[R349-01-375M]
[SS676]
1/2" Screw
Ganging Block
Part no. CB-209-1372 3/29/21
PL Portray Full Length Cabinet Ganging Recess Mount Kit
© 2021 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
4
Installation instructions
Publicité
