newmotion Home Standard 3,7 Manuel D'installation page 16

6. PRODUCT USE / OPERATION
6.1 BEFORE USE: ACTIVATION &
REGISTRATION
To make the charge point ready for use the owner needs
to activate the charge point through our online portal
my.newmotion.com. The serial number of the charge
point is required for this process and can be found on the
right hand side of the chargepoint. Charge cards can be
activated in the same online portal.
6.2 REGULAR USE
Introduction to charging your EV:
First step is to connect your car to the charge point by
plugging in the charge cable.
Because you are using Plug&Charge the session will
start automatically.
When the car has delayed charging configured, the LED
will remain green, until charging can start from car and
charge point.
Start charging? Plug in
Stop charging? Unplug
Full or waiting to charge
Plug in or identify
Charging
Not accepted
Error
Flashing green or multi colors: starting procedure or
software update procedure for charge point.
INSTRUCTION MANUAL – P16
0131NM02INT01