Canyon Badian CNS-SW68 Guide Rapide page 7

START OF USE
Charging. Charge the device before using it for the first time. To do
this, connect it to the power supply as shown in figure C.
WARNING! The output parameters of the power supply must not
exceed 5.0 V / 1.0 A
Switching-on Press and hold the device screen for 3–5 seconds
until the watch face appears (see figure D).
Switching-off. While on the screen with the dial, swipe down. Select
("Settings"). On the menu that appears, press
("Yes") (see figure E).
Installation and connection to Canyon Life. To make your watch
and smartphone work together, install the free Canyon Life app.
Scan the QR code (see page 2) to go to Google Play or the App
Store. Next, activate BT on your smartphone, open the Canyon Life
app, click "Connect BT Device". Place your watch and smartphone
next to each other and press "Start". Select your watch from the list
(Badian SW-68) and click "Add device". When you connect to the
app, the watch automatically sets the current date and time.
Change the watch faces (see figure D). While on the dial screen,
press and hold your finger on the screen until the dial selection
indicator appears. Swiping to the right or left, select the dial you like.
Tap on the screen to set it. Detailed information is available in the
full user manual.
Menu navigation. When you are on a screen with a dial, swipe down
to go to the menu. In the menu data about the level of charge of the
device and BT connection are available, as well as the buttons (see
figure F):
"Theater" mode.
Setting the minimum
screen brightness and
disable vibration
Vibration. Enable or
disable vibration
Brightness. Changing
the brightness level
(5 levels)
Settings. List of
additional functions
and confirm with
Weather. Weather
forecast (need
connection to the app)
For a full description
of the applications,
see the full user
manual at
canyon.eu/drivers-
and-manuals
ENG
7