Horizon Global 76635 Instructions D'installation page 4

1. Remove frame plugs - Using a flat head screwdriver, remove (2) plastic plugs from the passenger side frame rail, repeat for opposite side.
2. Install hitch - Raise hitch into position. Using the supplied hardware, apply blue thread locker to bolts then loosely install (4) M12 bolts and conical
toothed washers as shown. See Figure 1. NOTE: It may be necessary to clean debris from existing weldnuts in frame using a wire brush.
①
FRAME RAIL
②
①
②
Figure 1
3. Torque fasteners - Tighten all M12 CL10.9 fasteners with torque wrench to 76 Lb.-Ft. (103 N*M)
Proper torque is needed to keep the hitch secure to the vehicle when towing.
©2023 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 12 76635NP 3-1-23 Rev. A