Télécharger Imprimer la page

Black & Decker DCM600 Mode D'emploi page 4

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches and
any other conditions that may affect its
operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised repair
agent.
• Before use, check the power supply cord for
signs of damage, ageing and wear.
• Do not use the appliance if the power supply
cord or mains plug is damaged or defective.
• If the power supply cord or mains plug is
damaged or defective it must be repaired by
an authorised repair agent in order to avoid a
hazard. Do not cut the power supply cord
and do not attempt to repair it yourself.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
Before use, check that the mains voltage
corresponds to the voltage on the rating plate.
This product must be earthed. Always check
that the mains voltage corresponds to the
voltage on the rating plate.
Appliance plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (Class 1) appliances.
4
All manuals and user guides at all-guides.com
Unmodified plugs and matching outlets will
reduce the risk of electric shock.
Extension cables & class 1
product
• A 3 core cable must be used as your tool is
• Up to 30m (100 ft) can be used without loss
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug
• Connect the brown lead to the live terminal of
• Connect the blue lead to the neutral terminal
• If the product is class I (earthed), connect the
Note: If your product is class II double insulated
(only 2 wires in the cord set), no connection is to
be made to the earth terminal.
Follow the fitting instructions supplied with good
quality plugs
Any replacement fuse must be of the same
rating as the original fuse supplied with the
product.
Warning! The above section on mains plug
replacement is for authorized service centre
personals.
earthed and of class 1 construction.
of power.If the supply cord is damaged, it
must be replaced by the manufacturer or an
authorised Black & Decker Service Centre in
order to avoid a hazard.
the new plug
green/yellow lead to the earth terminal.

Publicité

loading