Samsung RL48RWCPN Mode D'emploi page 14

17. Reattach the HANDLE
BARs on the other side of
doors in reverse order.
• ASSEMBLY OF THE FREEZER DOOR
18. Exchange the positions
of a bolt and the assy
HINGE LOW after making a
hole with phillips head driver
on the left bottom side of
the unit.
19. After switching the
position of the CAP HOLE
HINGE LOW, reassemble
the COVER LEG FRONT.
20. Switch the position of
the CAP HOLE HINGE MID
and a screw.
21. Switch the position of
the STOPPER DOOR and
the GROMMET HINGE as
shown.
22. Switch the position of
the GROMMET HINGE and
the CAP HINGE HOLE.
23. Carefully put the Freezer
door back on and assemble
HINGE MID with 2 bolts.
14_ operating
DA99-03458D-05.indb 14 DA99-03458D-05.indb 14
All manuals and user guides at all-guides.com
STOPPER STOPPER
GROMMET GROMMET
• ASSEMBLY OF THE FRIDGE DOOR
24. Carefully put the Fridge
door back on.
25. Secure the ASSY HINGE
UPP with 3 bolts as shown.
Make sure the Fridge Door
is firmly closed.
26. Switch the position of
the CAP HOLE HINGE UPP.
27. Reconnect the electric
wires and reposition the
wires inside of the CAP
CABI as shown below.
28. Reassemble the CAP
CABI after assuring the
position of Wires.
29. Detach the Fridge and
Freezer gaskets and attach
them after rotating 180˚.
(Make sure the door gaskets
are properly arranged.
If not, there can be a noise
or dew can be formed which
affects performance of the unit.)
30. Make sure the doors are
working properly.
CAP HOLE HINGE CAP HOLE HINGE
15. 5. 14. 15. 5. 14. 5:46 5:46