Publicité
Les langues disponibles
Les langues disponibles
Water tank
Firmly grab the water tank with
both hands and lift it up towards
you gently to remove the water
tanks.
Water tank may not be
available depending
on the model.
REVERSING THE DOOR SWING
Read these instructions completely and
carefully.
• Samsung recommends that reversing of
the door opening is only completed by
WARNING
Samsung approved Service providers.
This will be on a chargeable basis and at
the customers expense.
• Any damage caused while attempting to
reverse the door opening is not covered
under the appliance manufactures
warranty.
Any repairs requested due to this
circumstance will be completed on
a chargeable basis at the customers
expense.
1. Handle parts carefully to avoid scratching the
paint.
2. Lay out all the screws by their related parts to
avoid using them in the wrong places.
3. Provide a non-scratching work surface for the
doors. (ex:blanket)
4. During door reversing, refrigerator should not be
stained with oil.
5. We recommend to use tools described below.
(Possible to use similar size of socket wrench &
wrench)
12_ operating
DA99-03458D-05.indb 12
DA99-03458D-05.indb 12
All manuals and user guides at all-guides.com
Not provided
Phillips Head
Flat Head
Driver (+)
Driver (-)
Not provided
Allen Wrench
11mm Wrench
(3/16inch)
(for hinge shaft)
(for Mid hinge)
• DISASSEMBLY OF THE FRIDGE DOOR
- These operating instructions cover various
models.
- The characteristics of your appliance may differ
slightly from those described in this instructions.
1. Disassemble the CAP
CABI after removing 4
screws.
2. Disconnect electric wires
inside of the CAP CABI.
3. Remove 3 bolts on the
top of the refrigerator with
10mm socket wrench.
Make sure the door is firmly
closed.
4. Disassemble the Fridge
door by lifting it upward.
Be careful not to drop and
scratch the face of the
Fridge door.
10mm Socket
Wrench
(for bolts)
Additional part
Cover Wire
Hinge L
(In Top Cover)
15. 5. 14.
15. 5. 14.
5:46
5:46
Publicité
