Flash (R-Key) / Transfer A Call; Pause; Redial - TIPTEL 140 Manuel D'utilisation

Flash (R-key) / Transfer a call

This function is mainly for PBX systems. If you have call waiting service from your
network provider, it will also work for call waiting service.
a. Press R for call waiting service from your network provider.
b. Press R to transfer a call to another extension (within a PABX).
Note: Please, check flash timing in case of problems. PABX setting usually is 100
ms while network providers may use 100 ms or 300 ms. Please, ask your network
provider or PBX installer (in case this device is used behind a PABX) for the
appropriate setting.

Pause

Press / P for a break off of 1.2/2.4/3.6 seconds (depending on setting).

Redial

Pick up the handset or press
Operation
. Press / P to redial the last dialed number.
13
e
n
g