Publicité
Les langues disponibles
Les langues disponibles
Power off
Poor
signal
reception
No image
Video
is
displayed
without audio
There
is
sound but the
video is not
displayed or is
decolored
Static
noise
affects
the
quality
of
video
and
sound
The
interference
lines on the
screen
The
remote
control
does
not work
TROUBLESHOOTING
• Check if the power cord is brazed or damaged. If
there is no power supply, unplug the cord, stop for
60 seconds and plug it. Put TVBy on.
• A double image or rotten ghost nt be visible on
Miran, if there are large buildings or mountains in
your area. You can adjust the image manually :
adjust the direction of the external antenna.
• When using an internal antenna, sometimes b
signal reception could be more diffk ie. Adjust the
direction of antenna position for optimum reception.
If the reception does not improve, you may have to
switch to an external antenna.
• Check whether the antenna to the back of the TV is
connected correctly.
• View other channels to see if the problem still
occurs.
• Turn up the volume.
• Check if the TV is in mute mode.
• Try to adjust the contrast and brightness.
• Check whether the antenna to the back of the TV is
connected correctly.
• Electrical appliances such as hair dryers or vacuum
cleaner could cause interference with your TV ries.
Turn off these devices.
• Check if the plastic confection is removed from the
remote control. Try using the remote control closer
to the TV. Check that the batteries are inserted
correctly or replace the batteries.
EN-37
Publicité
