Publicité
Les langues disponibles
Les langues disponibles
Picture mode
- Press the w and s to select Picture Mode, then press the
OK button to enter the submenu.
- You can change the values of contrast, brightness, color,
sharpness and color when the picture is in
Personal mode.
- Tip: You can press the button to change PMODE the
picture mode directly.
Contrast / Brightness / Color / Tint / Sharpness
Press the w and s to select the option you want to adjust.
- Contrast: Set the light intensity of the image, the shade of the image remains
unchanged.
- Brightness: Set the output of the optical fiber to adjust the brightness of the image.
- Color: Adjust the saturation of color to your chobc.
- Complexion: Use to compensate for the color with a broadcast NTSC system.
- Sharpness: Adjust the Sharpness of the image in detail.
Color temperature
- Adjusts the white tones of the image.
- Press the w and s to select color temperature, then
press the OK button to enter the submenu.
- Press c / d to select: Cool, Normal, Warm.
- You can change the values of red, green and blue
colors when the temperature is in USER mode.
Cool: Gives the white a bluish tint
Normal: Gives a neutral tint white
Warm: Gives the white a reddish tint
Noise Reduction
- Reduces image noise and improve picture quality.
- Press the r and s to select.
- Noise Reduction and press OK to enter the submenu.
Off: Turn off noise reduction. Low Detection and
reduction of low noise.
Middle: Detection and reduction in average noise.
Top: Detection and reduction of high noise.
Default: Default.
EN-22
EN-22
Publicité
