Oceanic OCEALED19120B2 Guide D'utilisation page 73

Schedule List
Press the w and s to select programming list and press the Enter key to enter the
submenu.
Available
Press YELLOW button to enter the interface
below
The following message indicates that the
programming is successful (in case of schedule
conflict warning will be displayed).
Signal Information
Press the w and s to select Signal Information,
press the Enter key to devote Information Signal.
Only available if DTV signal.
CI Information(Need to support the CI function)
- Press the w and s to select CI
Information and press the button to
display information after the insertion of
the IC card.
- List CHAINS source Satellite. (Must be
compatible with the DVB-S2 based)
EN-20
EN-20