Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 Set the minutes with the
5 Press the OK or CLOCK button to confirm, the
built-in clock starts operating and the seconds
start counting from 0.
Note:
* The operating time of every step should not take
longer than 15 seconds or it will return to the
original display.
* If there is a power failure or the power system is
turned off, the clock will lose its setting.
To confirm the clock time
When you press the CLOCK button, the clock time
is displayed. Wait for a few seconds for the display
to return to the original display.
Adjust volume level
During play, press the VOL+/- buttons to increase/
decrease the volume level.
Select a preset sound effect
During play, press the P-EQ button repeatedly to
select:
- [FLAT]
- [Pop]
- [Classic]
- [Rock]
- [Jazz]
Mute sound
During play, press the MUTE button to mute or restore
sound. Press this button again or press VOL + button
to cancel the effect.
Adjust brightness of display panel
Press the DIM button repeatedly to select different
levels of brightness for the display panel.
Play
Play a disc
Caution!
- Never look at the laser beam inside the unit.
- Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
- Never put any objects other than discs into the
disc compartment.
1 Press the DISC/USB button on the remote control
or the FUNCTION button on the front panel to
select the DISC source.
2 Use the K button to open the disc tray.
3 Place a disc onto the disc tray (with the printed
side up) and use the K button to close the disc tray.
24
button or
button.
4 The unit will read the disc and play it automatically.
-
To stop play, press the
-
To pause or resume play, press the
-
To skip to the previous/next title/chapter/track,
press the
/
/PAIR buttons.
H
G
If play does not start automatically:
-
Select a title/chapter/track and then press the
button.
BF
Using the disc menu
When you load a DVD/(S)VCD disc, a menu may be
displayed on the TV screen.
To access or exit the menu manually:
Press the MENU button.
For VCD with PlayBack Control (PBC) feature
(version 2.0 only):
With the PBC feature, you can play VCD interactively
according to the menu screen. During play, press the
MENU button to enable/disable PBC.
-
When PBC is enabled, the menu screen is
displayed.
-
When PBC is disabled, normal play is resumed.
Select an audio language
You can select an audio language on DVD videos.
During disc play, press the AUDIO button.
- The language options appear. If the selected
audio channel is unavailable, the default disc
audio channel is used.
Note:
For some DVDs, the language can only be changed
from the disc menu. Press the SETUP button to
access the menu.
Select a subtitle language
You can select a subtitle language on DVD discs.
During play, press the SUBTITLE button.
- The language options appear. If the selected
subtitle is unavailable, the default disc subtitle is
used.
Note:
For some DVDs, the language can only be changed
from the system menu. Press the SETUP button to
access the menu.
Play from USB
1 Insert the USB device.
button.
L
button.
BF
DVD Microsystem
Publicité
Chapitres
Table des Matières
